Most custom screen orders that go wrong don’t go wrong in the factory. They go wrong before the order is placed — in the measurement, the mesh choice or the installation assumption.

We’ve made thousands of custom screens and shipped them to more than 40 countries. These are the five mistakes we see most often, and how to avoid each one.

Mistake 1: Measuring the Wrong Part of the Window This is the single most common cause of a screen that doesn’t fit.

What people do: They measure the outer frame of the window, or the whole opening including the surrounding trim.

What they should do: Measure the surface the screen will actually sit against.

For a push-out or casement window, that’s the frame edge where the 3M adhesive will be applied. For a sash or double-hung window, it’s the inner frame opening of the lower sash — not the whole window. For a doorway, it’s the full opening between the frame edges.

How to avoid it: Send a photograph of the window with a tape measure in frame. We check every dimension against the photo before production, and flag anything that looks inconsistent.

Mistake 2: Choosing Mesh for the Wrong Climate A mesh that works in one climate fails in another — not because the product is poor, but because the specification doesn’t match the conditions.

What people do: They order the mesh that’s cheapest, or the one that looks best in a photo, without considering where it’s going.

What they should do: Match the mesh to the climate:

Coastal and salt-air — stainless steel. Synthetic mesh corrodes and moulds.

Tropical and humid — stainless steel. Synthetic mesh stays damp and supports mould.

Desert and arid — ultra-fine stainless steel. Coarse mesh lets sand through.

Cold and snowy — stainless steel. Synthetic mesh goes brittle and cracks.

Urban and high-pollution — fine stainless steel. Soot stains synthetic mesh permanently.

Pollen-heavy — ultra-fine mesh. Coarse mesh lets pollen through.

How to avoid it: Tell us your country and city when you enquire. We match the mesh to the climate before quoting.

Mistake 3: Assuming a Standard Size Will Fit Older housing stock is rarely square or uniform. Victorian terraces, US double-hung windows in pre-war buildings, Australian Queenslanders and Singaporean HDB flats all have irregular openings.

What people do: They buy a standard size and fit it with clips or springs, and accept the edge gap.

What they should do: Measure the actual opening and order to that measurement. An edge gap lets in as much dust and as many insects as an open window.

How to avoid it: Take the minimum width and height measurement, not the average. If the frame is visibly out of square, send photos and we’ll cut to template.

Mistake 4: Fixing It in a Way That Costs the Deposit For renters, the fixing method matters as much as the mesh.

What people do: They screw the screen frame to the window frame, then discover at move-out that the holes cost them the deposit.

What they should do: Specify adhesive fixing. High-strength 3M tape applied to the frame edge holds firmly and lifts away cleanly. No holes, no making good, no deduction.

How to avoid it: Tell us at enquiry whether the property is rented. We’ll specify adhesive fixing as standard and confirm the frame surface is suitable.

Mistake 5: Forgetting That It Has to Be Cleaned A screen that can’t be removed for cleaning isn’t a filter — it’s a dust trap. Once it clogs, airflow drops and the screen starts redistributing what it was meant to keep out.

What people do: They buy a fixed screen, or a track system that can’t be removed, and assume it will look after itself.

What they should do: Specify a screen with clip-out panels. Press the catches, lift the panel out, rinse it, let it dry, clip it back. Two minutes, no tools.

How to avoid it: Check that the screen has removable panels before ordering. If it doesn’t, it will clog and stay clogged.

A Sixth Mistake Worth Mentioning: Ordering All at Once People often measure one window, order one screen, fit it, and then realise they need screens for the rest of the house — and have to start the process again.

What to do instead: Measure every opening you’re likely to want screened, in one pass. Send them together. We quote the whole order at once, produce to consistent specifications, and ship in one delivery. It’s cheaper, faster and produces a consistent result across the property.

What We Do to Catch These Mistakes Every order goes through the same checks before production:

Dimension check against photographs — we flag anything inconsistent

Climate-matched specification — mesh and frame recommended for your location

Fixing method confirmed — adhesive for rentals, screw-fixed available for high-traffic doorways

Removable panel confirmed — every screen we make has clip-out panels

Consistent specification across openings — one mesh, one frame finish, one fixing method

If something looks wrong at any of these stages, we raise it before production, not after.

Get a Free Quote Send us your window and door dimensions, photographs and your country. Tell us whether you rent or own, whether you have cats, dogs or both, and how many openings you need. We’ll confirm the specification and reply within 24 hours with a detailed quotation.

WhatsApp: FSMBOR — send your size and country Email: reply within 24 hours

Message us your dimensions for a free quote.

Five mistakes that ruin a custom screen order — measuring the wrong surface, choosing mesh for the wrong climate, assuming standard sizes fit, fixing in a way that costs the rental deposit, and forgetting that the screen has to be cleaned. Custom pet-proof screens with 3M adhesive fixing, removable and washable panels, stainless steel and ultra-fine mesh, aluminium frames, manufactured in Foshan and shipped to over 40 countries.